Your present location:Home >> Company news >> How to make the point of impact at the sight of the lens center position

Font Size:big  middle  small

How to make the point of impact at the sight of the lens center position

Number of visits: Date:2015-08-25

In the process of using optical sight, sometimes we can find that the position of the central calibration line is not in the center of the lens. The scale line is not in the center, the sight of the impact is not in our predetermined place, what to do?
Don't worry, we can adjust the regulation scope of ballistic button on the sight of the impact of regulation.
Adjustment methods are as follows:
In aiming mirror at the top of the adjusting knob for ballistic compensation adjustment knob, usually above the painting with an arrow, marked with the letter 'U', meaning along the arrow direction of rotation knob, the impact will be in the vertical direction to adjust. U refers to the meaning of up; on the contrary
Located on the right side of the adjusting knob for windage adjusting knob, usually painted on the arrow, marked with the letter 'l', meaning along the direction of the arrow adjustment knob, the impact will be in the horizontal direction to the left side of the regulation. L refers to the meaning of left to the left; on the contrary.
How do you know you have the sight of the impact point adjusted? We need to aim at the mirror at school.
The target, aimed at the target, a group of 5 rounds of shooting. For example: impact were scattered in the bull's-eye partial right below, at this point, first in the horizontal direction adjustment windage knobs, along L in the direction of rotation of the knob impact will in the horizontal direction of the move to the left, until the regulator to basically in the bull's eye just below; then in the vertical direction regulation distance compensation knob, along the U direction knob knob impact will be in the vertical direction gradually to move until the basic and the bull's-eye coincidence......
It is important to note that, pellet production process of non-compliance will lead to irregular impact. At this time talking about the scope of regulation is substantially equal to a waste of effort, toy making precision or not, is directly related to the accuracy. The adjustment of the aiming device is based on the relative consistency of the ballistic trajectory.
Through these methods, we can make the aiming mirror the central scale line in the central position of the lens, which aimed at the mirror of the impact on the central position of the lens the.

TypeInfo: Company news

Keywords for the information:

About us
Profile
Honors
Culture
Video
Photos
Equipment

Products
AOEG Series
AOIR Series
AOL Series
MA Series
Short Scope with Laser Series
Laser Series
Reflex Red Dot Sight
...........

News
company news
Industry News
Service
Network
Pledge
Member
Register

Contact us
Contact
Message

Nantong chengxin Optical Instrument Co.,Ltd.
Add:Wujie industrial Park,Tongzhou District,Nantong,Jiangsu,China
Tel:86-513-86760911
Fax:86-513-86760019
E-mail:wyj@ntans.com
Web:http://www.ntans.com
http://www.spikeoptical.com

Copyright © 2015  Nantong chengxin Optical Instrument Co.,Ltd.  编号:苏ICP备09082433号  Powed by  www.300.cn

诚信光学仪器南通光学仪器南通光学光学仪器棱镜光学仪器南通瞄准镜